Upper Ocean Four-Dimensional Variational Data Assimilation in the Arabian Sea and Bay of Bengal     

Suneet Dwivedi  Atul Srivastava  Alok Kumar Mishra 《Marine Geodesy》2018,41(3):230-257

A regional ocean circulation model with four-dimensional variational data assimilation scheme is configured to study the ocean state of the Indian Ocean region (65°E–95°E; 5°N–20°N) covering the Arabian Sea (AS) and Bay of Bengal (BoB). The state estimation setup uses 10 km horizontal resolution and 5 m vertical resolution in the upper ocean. The in-situ temperature and salinity, satellite-derived observations of sea surface height, and blended (in-situ and satellite-derived) observations of sea surface temperature alongwith their associated uncertainties are used for data assimilation with the regionally configured ocean model. The ocean state estimation is carried out for 61 days (1 June to 31 July 2013). The assimilated fields are closer to observations compared to other global state estimates. The mixed layer depth (MLD) of the region shows deepening during the period of assimilation with AS showing higher MLD compared to the BoB. An empirical forecast equation is derived for the prediction of MLD using the air–sea forcing variables as predictors. The surface and sub-surface (50 m) heat and salt budget tendencies of the region are also investigated. It is found that at the sub-surface, only the advection and diffusion temperature and salt tendencies are important.  相似文献   

Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law          下载免费PDF全文

Ahmad Hajjar  Luc Scholtès  Constantin Oltéan  Michel Antoine Buès 《水文研究》2018,32(16):2510-2525

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.  相似文献   

“数字海底”--海底数据集成管理与可视化研究     

肖鹏  王悦东  李安龙 《海洋信息》2020,35(1):40-45,51

针对目前"数字海底"建设中存在海底调查数据集成管理与三维可视化表达不足等问题,本文采用GIS技术,以黄河水下三角洲埕北海域为研究对象,利用地理空间数据集成理论与三维建模方法,建立了埕北海域三维海底空间数据库,实现了研究区域地形数据、地层数据、钻孔数据、表层沉积物数据的有效组织管理与可视化,并在此基础上,采用ArcGIS Engine 10.0,结合.NET平台,在Visual Studio 2010开发环境下,利用C#语言进行了二次开发,实现了基于C/S (Client/Server)架构的三维海底虚拟仿真系统的开发,设计了一套面向埕北海域的三维海底虚拟仿真原型系统。  相似文献   

徕卡三维激光扫描系统在建筑物精细建模中的应用   总被引：2，自引：0，他引：2  

朱曙光  何宽  周建郑 《测绘通报》2018,(2):154-156

三维激光扫描技术作为一种新的测绘技术手段改变了传统的测量模式,利用三维激光扫描技术可以快速、高效、连续地获取海量的点云数据,通过处理可以快速得到被测目标的三维模型。本文主要结合徕卡Scan Station P40三维激光扫描系统介绍其在复杂建筑物精细建模中的应用,通过对点云数据及建模精度分析,得出了有益的结论。  相似文献   

Calibration of cyclic constitutive models by oscillating functions     

Muyiwa Ebenezer Alalade  Binod Kafle  Frank Wuttke  Tom Lahmer 《Geomechanics and Geoengineering》2018,13(2):146-157

Most structures are subjected to more cyclic loads during their life time than static loads. These cyclic action could be a result of either natural or man-made activities and may lead to soil failure. In order to understand the response of the foundation and its interaction with these complex cyclic loadings, various researchers have over the years developed different constitutive models. Although a lot of research is being carried out on these relatively new models, little or no details exist in literature about the model-based identification of the cyclic constitutive parameters which to a large extent govern the quality of the model output. This could be attributed to the difficulties and complexities of the inverse modeling of such complex phenomena. A variety of optimisation strategies are available for the solution of the sum of least-squares problems as usually done in the field of model calibration. However, for the back analysis (calibration) of the soil response to oscillatory load functions, this article gives insight into the model calibration challenges and also puts forward a method for the inverse modeling of cyclic loaded foundation response such that high-quality solutions are obtained with minimum computational effort.  相似文献   

地质导向技术在L型煤层气水平井 T-P05井中的应用          下载免费PDF全文

郭宝林  李琪  张兴龙  聂涛  于建克  李盟国 《探矿工程》2018,45(1):9-13

通过分析山西L型煤层气水平井的技术难点,着重建立造斜着陆与水平段导向两大导向模型,形成了以标志层划分与对比、地层倾角推算、地质建模和实时轨迹控制四个方面为主的L型煤层气水平井地质导向技术流程,该技术在T-P05井的成功应用,不仅丰富了煤层气水平井地质导向技术的内容与方法,更进一步验证了该技术在现场具有较强的可操作性和良好的应用前景,值得大力推广。  相似文献   

基于CART算法的三维成矿预测研究——以安徽白象山矿区为例          下载免费PDF全文

李志辉  赵萍  李晓晖  袁峰  周宇章 《地质科学》2018,(4):1314-1326

把地质大数据和人工智能技术引入矿产资源定量评价及成矿预测体系中,提高了海量地质数据的有效信息挖掘,弥补了传统方法的不足。本文基于白象山矿区基础地质资料和物化探成果资料,利用三维地质体建模技术和三维空间分析技术,量化三维控矿因素,建立了一种基于CART 算法的三维成矿预测模型。通过在白象山矿区的实验表明：该模型能较好的定位已知矿体,并且预测出在已知矿体北部、东部、东北部、西部、南部和东南部具有较高的成矿概率,可圈定找矿靶区。该模型将地质大数据应用于找矿勘探工作,具有纯数据驱动、预测精度高、预测结果可靠等优点。研究发现,该模型的预测效果与训练数据集的数量、矿控因素提取、决策树深度等有关。  相似文献   

准噶尔盆地腹部地区生烃增压定量化评价——东道海子北凹陷为例          下载免费PDF全文

于春勇郭小文  任战利任文波 杨桂林 《地质科学》2018,(1):207-220

目前准噶尔盆地腹部地区超压演化过程仅提供了相对时间、概念、定性的认识,并未达到定量化。本文以东道海子北凹陷为例,基于流体包裹体、单井一维和剖面二维烃源岩成熟生烃史模拟技术,采用生烃增压模型定量化评价了侏罗纪八道湾组顶部和底部烃源岩的生烃增压演化过程。研究结果表明侏罗纪八道湾组为东道海子北凹陷主力烃源岩,具有幕式排烃的特点。八道湾组底部烃源岩经历了3 次超压增加和两次超压释放的过程,顶部烃源岩经历了两次超压增加和一次超压释放的过程。八道湾底部烃源岩3 次超压增加的时间分别为距今170～70 Ma、55～23 Ma、10～0 Ma,对应最大压力系数均为2.0,最大剩余流体压力50 MPa,两次超压释放的时间分别为70～55 Ma、23～10 Ma;八道湾组顶部烃源岩两次超压增加的时间分别为130～40 Ma、23～0 Ma,对应流体最大压力系数最大亦可达2.0 左右,最大剩余流体压力44 MPa,超压释放的时间为40～23 Ma。  相似文献   

Crust structure of the northeastern Barents Sea basin area     

A.L. Piskarev  A.A. Kireev  V.A. Savin  O.E. Smirnov 《Russian Geology and Geophysics》2018,59(7):803-812

Processing of data from regional geophysical surveys completed in the northern Barents Sea has provided updates to gravity and magnetic databases, structural maps of seismic interfaces, and positions of anomaly sources, which made a basis for 3D density and magnetic models of the crust. The new geological and geophysical results placed constraints on the boundaries between basement blocks formed in different settings and on the contours of deposition zones of different ages in the northeastern Barents Sea. The estimated thicknesses of sedimentary sequences that formed within certain time spans record the deposition history of the region. There is a 20-50 km wide deep suture between two basins of Mesozoic and Paleozoic ages in the eastern part of the region, where pre-Late Triassic reflectors have no clear correlation. The suture slopes eastward at a low angle and corresponds to a paleothrust according to seismic and modeling data. In the basement model, the suture is approximated by a zone of low magnetization and density, which is common to active fault systems. The discovery of the suture has important geological and exploration implications.  相似文献   

Role of heterogeneities in jointing (fracturing) of geological media: Numerical analysis of fracture mechanisms     

《Comptes Rendus Geoscience》2018,350(8):452-463

Fracture process is investigated using finite-difference simulations with a new constitutive model. It is shown that both geometry and fracture mechanism itself depend on the preexisting heterogeneities that are stress concentrators. In the brittle regime (low pressure, P), Mode-I fractures propagate normal to the least stress σ₃ from the imposed weak zones. At high P, shear deformation bands are formed oblique to σ₃. At intermediate values of P, the fracture process involves both shear banding and tensile cracking and results in the initiation and propagation of pure dilation bands. The propagating band tip undulates, reacting on the failure mechanism changes, but its global orientation is normal to σ₃. The σ₃-normal fractures are joints. There are thus two types of joints resulting from Mode-I cracking and dilation banding, respectively. The obtained numerical results are in good agreement with and explain the results from previous similar experimental study.  相似文献